Best online shopping to purchase span gas in UK: Helium / argon mixtures are sometimes used for their higher heat characteristics. Gas mixtures, usually 25% helium and 75% argon are sometimes used and can help to increase travel speeds when AC – gas tungsten arc welding. Mixtures of more than 25% helium for AC – gas tungsten arc welding are used, but not often, as they can tend to produce instability, under certain circumstances, in the AC arc. Pure helium or high percentages of helium (He-90%, Ar-10%) shielding gas are used primarily for gas tungsten arc machine welding with direct current electrode negative (DCEN). Often designed as seam welders, the combination of GTAW – DCEN and the high heat input from the gas used can provide fast welding speeds and outstanding penetration. This configuration is sometimes used to produce full penetration butt welds, welded from one side only, onto temporary baking with no vee-groove preparation, just a square edged plate.
Safety: While argon is a good fit for a variety of welding jobs, it can be a safety risk. As with any gas work, there are steps to take to prevent causing an accident. Argon is stored in high-pressure tanks, and although its inert qualities mean that it doesn’t easily react to other chemicals, it is essential to be fully trained in handling and transporting gases to minimise the risk of accidents and hazards. The risk of gas leaking or spilling needs to be taken seriously; gas should be stored in a well-ventilated room. Argon is colourless and odourless so ensuring ventilation is available and that tanks are sealed adequately is critical.
WSD (weldingsuppliesdirect.co.uk) supplies a wide range of shielding gases specifically designed to optimise performance in particular conditions. In vehicle repair and manufacturing, argon-based gas mixtures are commonly used to MIG weld carbon and low alloy steels. Argoshield Light is one of those choices. It’s ideal if you are welding thinner carbon steel ranging from 0.6 to 5mm in thickness. The addition of oxygen to Argoshield increases arc stability to minimise spatter and fast weld speeds with its low heat input reduce distortion. So it’s perfect for our earlier example where the components of a car are being painted or powder coated after welding. Read more info at Span Gas Bottle.
The primary task of a shielding gas is to protect the weld pool from the influence of the atmosphere, i.e. from oxidation and nitrogen absorption, and to stabilize the electric arc. The choice of shielding gas can also influence the characteristics of the weld penetration profile. The basic gas for MIG/MAG welding is argon (Ar). Helium (He) can be added to increase penetration and fluidity of the weld pool. Argon or argon/helium mixtures can be used for welding all grades. However, small additions of oxygen (O2) or carbon dioxide (CO2) are usually needed to stabilize the arc, improve the fluidity and improve the quality of the weld deposit. For stainless steels there are also gases available containing small amounts of hydrogen (H2). Zero calibration gas is a gas that does not contain flammable gas. You will need this gas in the calibration of analyser’s or gas detectors. Span calibration gases are a more advanced type of calibration gas. They contain a more precise total make up of detectable gases.
The risk of over-exposure to nitrous gases is considered to be low for oxy-fuel gas cutting, unless the work conditions are unfavourable e.g. hand held cutting in a confined space with a high duty-cycle. Plasma cutting with air or nitrogen generates higher levels of nitrous gases than oxy-fuel gas cutting and there is considerable risk of over-exposure. Free-burning flames generate the highest concentrations of NO and NO2, and the risk of over-exposure is also highest. Caution should be exercised during activities such as flame heating, flame straightening, flame brazing, flame spraying, etc – particularly as emissions from these processes are difficult to control. The flame should be extinguished when not in use. Source: www.weldingsuppliesdirect.co.uk.